Industrie-PC
Feldbuskomponenten
Buskoppler
Busklemmen-Controller
Busklemmen
Klemmenmodule
EtherCAT Box
EtherCAT-Klemmen
EtherCAT-Steckmodule
EtherCAT | System-Dokumentation
Vorwort
EtherCAT Grundlagen
Einrichtung im TwinCAT Systemmanager
EtherCAT Diagnose
Allgemeine Inbetriebnahmehinweise des EtherCAT Slaves
EtherCAT AL Status Codes
Error Code 0x0000
Error Code 0x0001
Error Code 0x0002
Error Code 0x0004
Error Code 0x0011
Error Code 0x0012
Error Code 0x0013
Error Code 0x0014
Error Code 0x0015
Error Code 0x0016
Error Code 0x0017
Error Code 0x0018
Error Code 0x0019
Error Code 0x001A
Error Code 0x001B
Error Code 0x001C
Error Code 0x001D
Error Code 0x001E
Error Code 0x001F
Error Code 0x0020
Error Code 0x0021
Error Code 0x0022
Error Code 0x0023
Error Code 0x0024
Error Code 0x0025
Error Code 0x0026
Error Code 0x0027
Error Code 0x0028
Error Code 0x0029
Error Code 0x002A
Error Code 0x002B
Error Code 0x002C
Error Code 0x002D
Error Code 0x0030
Error Code 0x0031
Error Code 0x0032
Error Code 0x0033
Error Code 0x0034
Error Code 0x0035
Error Code 0x0036
Error Code 0x0037
Error Code 0x0041
Error Code 0x0042
Error Code 0x0043
Error Code 0x0044
Error Code 0x0045
Error Code 0x004F
Error Code 0x0050
Error Code 0x0051
Error Code 0x0060
Error Code 0x0061
Error Code 0x00F0
EtherCAT AL Status Codes
EtherCAT Betrieb - Ansteuerung
EtherCAT Betrieb - Timing
Distributed Clocks
Konfiguration der Klemmen
FAQ
Anhang
I/O-Analog-Handbuch | Hinweise zu I/O-Komponenten mit analogen Ein- und Ausgängen
Infrastruktur für EtherCAT/Ethernet | Technische Empfehlungen und Hinweise zur Auslegung, Ausfertigung und Prüfung
EJ110x-00xx | EtherCAT-Koppler
EJ1008 | 8-Kanal Digital Eingangsmodul 24 V DC, 3 ms
EJ1122 | 2-Port EtherCAT-Abzweig
EJ1128 | 8-Kanal Digital Eingangsmodul 5 V DC / 3,3 V DC
EJ1254 | 4-Kanal-Digital Eingangsmodul 24 V DC, Filter 1 µs, mit Timestamp
EJ18xx | 16-Kanal Digital Eingangsmodule
EJ2008 | 8-Kanal Digital Ausgangsmodul 24 V DC, 0,5 A
EJ2128 | 8-Kanal Digital Ausgangsmodul 5 V DC / 3,3 V DC
EJ2262 | 2-Kanal Digital Ausgang, 24 V DC, 0,5 A, Oversampling
EJ2502 | 2-Kanal Pulsweiten Ausgangsmodul 24 V DC
EJ2521-0224, EJ2522 | Pulse-Train-Ausgangsmodul, Inkremental-Encoder-Simulationsmodul
EJ2564 | EtherCAT-Steckmodul, 4-Kanal LED-Ausgang, 5...48 V DC, 4 A, RGBW, Common Anode
EJ28x9 | 16-Kanal Digital Ausgangsmodule 24 V DC, 0,5 A
EJ30xx | Analoge Eingangsmodule 12 Bit
EJ31xx | Analog Eingangsmodule 16 Bit
EJ32xx | 2-, 4-Kanal Eingangsmodule PT100 (RTD)
EJ3255 | 5-Kanal Eingangsmodul, Potentiometerauswertung mit Sensorversorgung
EJ3318 | 8-Kanal Eingang, Thermoelement mit Drahtbrucherkennung
EJ40xx | Analog Ausgangsmodule (12 Bit)
EJ41xx | Analog Ausgangsmodule (16 Bit)
EJ5002 | SSI Geber Interface
EJ5021 | 1-Kanal-Encoder-Interface, SinCos, 1 Vss
EJ5042-0010 | 2-Kanal Encoder-Interface, BiSS-C, ohne Sensorversorgung
EJ5101, EJ5101-0090 | Inkremental-Encoder-Interface
EJ5112 | 2-Kanal-Inkremental-Encoder-Interface, 5 V DC (DIFF RS422, TTL, Open Collector), 5 MHz, 2 x AB oder 1 x ABC
EJ5151 | Inkremental-Encoder-Interface
EJ6002 | 2-Kanal serielle Schnittstelle RS232, RS422 oder RS485
EJ6070 | EtherCAT-Steckmodul, License-Key für TwinCAT 3.1
EJ6080 | Kommunikations-Interface, Speicher, 128 kByte, NOVRAM
EJ6224, EJ6224-0090 | IO-Link Master
EJ70x1 | Schrittmotormodule
EJ70x7 | Schrittmotormodule mit Inkremental-Encoder, feldorientierte Regelung
EJ7211-0010 | Servomotormodul für OCT, 48 V DC, 4,5 A (Ieff)
EJ7342 | 2-Kanal-DC-Motor-Endstufe 48 V DC, 3,5 A
EJ7334-0008 | 4-Kanal Motion Interface, DC-Motor, 24 V DC, 3 A
EJ7411 | 1-Kanal-Motion-Interface, BLDC-Motor, 48 V DC, 4,5 A, mit Inkremental-Encoder
EJ9001 | Platzhaltermodul
EJ9400 | Netzteil-Steckmodul zur E-Bus-Versorgung, 2,5 A
EJ9404 | Netzteil-Steckmodul zur E-Bus-Versorgung, 12 A
EJ9505 | Netzteil-Steckmodul 5 V DC
EJ9576 | Brems-Chopper-Modul
EJ8906-0005 | EJ Starter Board (EtherCAT-Steckmodule nicht enthalten)
EJ8xxx | Signal-Distribution-Board für Standard EtherCAT-Steckmodule
Feldbus Box und IO-Link-Box
Feldbuskarten und Switche
Stromversorgungen
Stromwandler
Feldbuszubehör
Antriebstechnik
TwinCAT 3
TwinCAT 2
Application Notes
Suche
News
Home